Z-Match Tuner Circuit Board and T200-6 Toroid
Product Description
Z-Match Tuner Home Construction Project. This is the circuit board and T200-6 Toroid only. Wire not supplied. To complete the project, the builder is required to drill according to supplied templates. Finish is a user option. Laminated photo paper is an option.
The HFPacker Z-Match Tuner is a construction project that is reasonably simple to build and provides great utility in the shack or for HF Packing. This tuner design has been around for years and what sets it apart from other tuners is a resonant circuit which uses a fixed inductor.
Features • Resonant tank circuit • Band-pass filtering and harmonic attenuation. • High Q and more efficient than other type antenna tuners. • A fixed inductor simplifies construction and needs no rollers or taps. • High Quality USA manufactured air variable capacitors. 600 Vrms. • Clam Shell design provides easy circuit board access. • Continuous Reflected and Forward Power Measurement. • Light Bar Tuning. Ten LEDs in a bar graph of FWD or REFL outputs; On/Off switch to conserve power. • BNC and SO-239 Input and Outputs. Eliminate need for adaptors. • Bannana plug with ¾-inch spacing for balanced line output. • 80-10 meter operation. Match balanced or unbalanced loads. 10-2000 ohms • 100 Watt capacity • Hi-Z and Lo-Z output selection • Bypass or In-line operation • Series Tuning with two additional capacitance selections • Enclosure molded from flame retardant ABS plastic. • Blank Front and Rear panels. • 12V DC , 15 mA ; 75 mA during tune, On/Off switch. 2.5mm plug provided. Internal 9V battery provision. • Size: 7.5 “ Deep by 6.25 “ Wide by 3.5 “ High (excluding optional bail) • Weight: Less than 1 pound.
The HFPacker Z-Match Tuner is a construction project that is reasonably simple to build and provides great utility in the shack or for HF Packing. This tuner design has been around for years and what sets it apart from other tuners is a resonant circuit which uses a fixed inductor.
Features • Resonant tank circuit • Band-pass filtering and harmonic attenuation. • High Q and more efficient than other type antenna tuners. • A fixed inductor simplifies construction and needs no rollers or taps. • High Quality USA manufactured air variable capacitors. 600 Vrms. • Clam Shell design provides easy circuit board access. • Continuous Reflected and Forward Power Measurement. • Light Bar Tuning. Ten LEDs in a bar graph of FWD or REFL outputs; On/Off switch to conserve power. • BNC and SO-239 Input and Outputs. Eliminate need for adaptors. • Bannana plug with ¾-inch spacing for balanced line output. • 80-10 meter operation. Match balanced or unbalanced loads. 10-2000 ohms • 100 Watt capacity • Hi-Z and Lo-Z output selection • Bypass or In-line operation • Series Tuning with two additional capacitance selections • Enclosure molded from flame retardant ABS plastic. • Blank Front and Rear panels. • 12V DC , 15 mA ; 75 mA during tune, On/Off switch. 2.5mm plug provided. Internal 9V battery provision. • Size: 7.5 “ Deep by 6.25 “ Wide by 3.5 “ High (excluding optional bail) • Weight: Less than 1 pound.
