MP-1 Travel Antenna fits in a brief case!
Product Description
MP-1 Portable Travel Antenna 7MHz - 450 MHz QRP to 200W. Manually adjust sleeve to tune antenna. Ideal for operating from a hotel room balcony, rent car, bicycle. Includes:
Whip - 4 ft Slider Collar with band lock Coil 17 inch brass rods (2) Universal mount with SO-239 C Clamp Counter-poise array Operation:
Find a support location for the universal mount. Attach with the C Clamp provided. Adjust the universal mount so the MP1 is vertical. Tighten bolts on the mount. Assemble the antenna using the two brass rods, sleeve and extend whip on top. Connect 52 coax from antenna to rig. Adjust slider to the frequency you want and snug down the band lock screw.
Whip - 4 ft Slider Collar with band lock Coil 17 inch brass rods (2) Universal mount with SO-239 C Clamp Counter-poise array Operation:
Find a support location for the universal mount. Attach with the C Clamp provided. Adjust the universal mount so the MP1 is vertical. Tighten bolts on the mount. Assemble the antenna using the two brass rods, sleeve and extend whip on top. Connect 52 coax from antenna to rig. Adjust slider to the frequency you want and snug down the band lock screw.
Accessories
Provides 80 Meter operation for the MP1 vertical antenna. Add this coil in series with the MP-1 coil for 80 meter operation. This inductor is 6 inches length, 1.25 inch diameter. The threads are 3/8-24. One end is male and the other is female. The inductance is 68.5 uH. This coil is used in line with the MP-1 antenna to cause it to resonate on 80 M. The adjustable coil of the MP-1 will tune the antenna from 3.5 to 4 MHz $32.00 | Includes: Three 12-inch screw in legs with rubber tips.
Base for legs and mounting for SO-239 connector (included)
Connection for a counter poise. Note: The picture shows the MP1 attached (not included). The MP1 is available separately. $32.00 |
Radio Side Mount Attach to the side of the FT817, IC706 or IC7000 with provided hardware. This accessory is for a portable setup. The MP-1 antenna is assembled on the bracket and A short length of coax (not supplied) connects the antenna to the radio. $25.00 | Whip for MP-1 An accessory part for the MP-1 Antenna. A 4 Ft telescoping stainless whip. $10.00 |
